Skip to content

Open 24/7

4.8 from 114 Google reviews

Eco Home Heating & Cooling

Furnace repair in Pleasant Grove, UT

Our shop is minutes from Pleasant Grove, and we’re open 24/7. A $129 diagnostic, then the repair price before anything gets fixed.

  • 4.8 from 114 Google reviews
  • Open 24/7
  • Serving all of Pleasant Grove
Gas furnace in a utility room after an Eco Home service visit

Being next door matters most when the heat goes out. Our shop on Automall Drive is just across the city line from Pleasant Grove, so a technician isn’t coming from the other end of the valley.

We work on every major furnace brand, from 30-year-old units in older homes near the center of town to high-efficiency furnaces in newer homes on the bench. You see the repair price before we start.

Why Pleasant Grove furnaces wear out

Basement furnaces working two floors

In a rambler with a finished basement, one furnace heats both levels. Uneven heat often comes from the ducts or returns, not the furnace, and we check that before changing parts.

Second and third furnaces

Many older Pleasant Grove homes are on their second or third furnace, sometimes installed without the venting or return air updated to match. Those mismatches shorten a furnace’s life.

Long heating season on the bench

Homes on the bench below Timpanogos see cold nights from October into April. That long season adds up to a lot of starts for ignitors and inducer motors.

Furnace problems we fix in Pleasant Grove

We bring the common parts, so many fixes happen on the first visit.

Upfront, every time

We charge $129 for the furnace diagnostic and give you the repair price before any work.

  • $129 diagnostic
  • Price before repair
  • Essential Care Plan members save 10%
  • Smile Guarantee

Worth repairing?

A furnace under about 15 years old with a modest repair is usually worth fixing.

If it’s older and needs a major part, compare a replacement. Pleasant Grove is on Rocky Mountain Power, so a heat pump paired with a new gas furnace gets the $1,450 Wattsmart rebate plus $700 to $1,000 from Enbridge Gas: at least $2,150, guaranteed. A furnace by itself starts at $3,990, installed in one day.

See what a new system costs ›

Rotten-egg smell? Leave first, call second.

Take everyone outside without using light switches or appliances. From outside, call Enbridge Gas at 1-800-767-1689 or 911. Call us once the gas company has cleared the house.

On every job, no exceptions

  • We pull the permit

    A permit means a city or county inspector checks the work for safety and code. It also protects you when you sell your home. Not every HVAC company pulls permits. We do on every job.

  • We haul away the old equipment

    Your old furnace, AC or heat pump leaves with us. Nothing is left in your yard or garage for you to deal with.

  • We leave it cleaner than we found it

    We clean up before we go and leave your home cleaner than we found it, so the only thing you notice is the new system.

What our customers say

4.8 from 114 Google reviews
“Garritt and Erwin showed up on time and started working, they answered all my questions throughout the day and were very professional and courteous. The install went flawless and looks great. They walked me through the thermostat settings and insured all systems were working properly before leaving. These gentleman did an awesome job, thanks.”
Chris P. · Google review · System installation

Furnace repair in Pleasant Grove: questions

How quickly can you get to Pleasant Grove?

Our shop is just across the line in American Fork, and we’re open 24/7. Call 801-396-0019 or book online.

How much is furnace repair in Pleasant Grove?

$129 for the diagnostic, then a set price for the repair before we start. Small parts like a flame sensor or ignitor cost much less than a blower or inducer motor. Essential Care Plan members save 10%.

Why is my basement so much colder than upstairs in winter?

Cold air settles, and basement returns and supply registers are often too few or poorly placed. We check airflow on each level before blaming the furnace.

My furnace is blinking a code. Can you read it?

Yes. Most furnaces flash a fault code on the control board. We read it, test the part it points to, and fix the actual cause.

Should I fix a 25-year-old furnace?

Small repairs, maybe. For a major part, a replacement is usually the better deal, especially with $2,150 or more in rebates on a heat pump and gas furnace system in Pleasant Grove.

Page updated