Colder nights in Cedar Valley
Parts of Eagle Mountain, especially around City Center, sit in a rain shadow with colder nights than the rest of the valley. Furnaces there run long and start often.
Furnace repair in Eagle Mountain, UT
Eagle Mountain nights get cold, especially out toward City Center. If your furnace quits, we’re open 24/7, with a $129 diagnostic and a price before any repair.
- 4.8 from 114 Google reviews
- Open 24/7
- Serving all of Eagle Mountain
Eagle Mountain’s furnaces have a lot in common: most were installed when the house was built, many are builder-grade models, and a growing number are 20 years old. That’s when parts like ignitors, flame sensors and inducer motors start to fail.
We repair all major furnace brands. You get the cause, the repair price, and our honest take on whether the repair is worth it.
What Eagle Mountain furnaces face
A big city spread out
Eagle Mountain covers more than 50 square miles, and some homes are a long drive from anywhere. Our technicians carry the common parts, so most repairs don’t wait on a parts run.
Dust and filters
New construction and open land mean more dust. Filters clog faster, and a clogged filter is one of the most common reasons a furnace overheats and shuts off.
Furnace repairs we do in Eagle Mountain
Most are completed on the first visit.
No heat at all
We test the thermostat, ignitor, flame sensor, pressure switch and board in order, and replace only what failed.Overheating shutdowns
Often a clogged filter or closed vents. If that’s not it, we check the blower and limit switch.Upstairs too warm, downstairs cold
An airflow problem more than a furnace problem. We measure and adjust.Rattling vents
Loose duct connections or a blower running too fast. Both can be fixed.Furnace short cycles
A dirty flame sensor or an oversized furnace. We find which.
No surprises on the price
A furnace diagnostic costs $129, and you approve the repair price before any work.
- $129 diagnostic
- Repair price up front
- Essential Care Plan members save 10%
- Smile Guarantee
Fix it or replace it?
If the furnace is younger than about 15 years and the repair is reasonable, repair it.
If it’s the original furnace and needs a major part, compare replacement. Eagle Mountain is on Rocky Mountain Power, so a heat pump paired with a new gas furnace gets the $1,450 Wattsmart rebate plus $700 to $1,000 from Enbridge Gas, at least $2,150 guaranteed. A furnace alone starts at $3,990, installed in one day.
See what a new system costs ›Gas smell means get out.
If you smell rotten eggs, leave the house with everyone and don’t use switches or appliances. Call Enbridge Gas at 1-800-767-1689 or 911 from outside, then call us once it’s safe.
On every job, no exceptions
We pull the permit
A permit means a city or county inspector checks the work for safety and code. It also protects you when you sell your home. Not every HVAC company pulls permits. We do on every job.
We haul away the old equipment
Your old furnace, AC or heat pump leaves with us. Nothing is left in your yard or garage for you to deal with.
We leave it cleaner than we found it
We clean up before we go and leave your home cleaner than we found it, so the only thing you notice is the new system.
What our customers say
4.8 from 114 Google reviews“Garritt and Erwin showed up on time and started working, they answered all my questions throughout the day and were very professional and courteous. The install went flawless and looks great. They walked me through the thermostat settings and insured all systems were working properly before leaving. These gentleman did an awesome job, thanks.”
Furnace repair in Eagle Mountain: questions
Will you come out to Eagle Mountain for a furnace repair at night?
Yes. We’re open 24/7 and serve all of Eagle Mountain. Call 801-396-0019 or book online.
How much does furnace repair cost in Eagle Mountain?
The diagnostic is $129, then you get an upfront price for the repair. A flame sensor costs much less than an inducer or blower motor. Essential Care Plan members save 10%.
How often should I change my furnace filter in Eagle Mountain?
Check it monthly, especially if construction is going on nearby. A standard 1-inch filter often needs replacing every one to two months here.
Why do my vents rattle when the furnace starts?
A single-speed blower comes on at full speed all at once, which can shake loose ducts and registers. We tighten what’s loose, and a variable-speed furnace ramps up gently.
My furnace is the original. Should I replace it?
If it’s around 20 years old and needs a big repair, replacement is usually the better deal, especially with $2,150 or more in rebates on a heat pump and gas furnace system.
More from Eco Home in Eagle Mountain
Page updated